If you’re wondering what the best tools to use when clean carpets are, this article is for you. It breaks down how to clean your carpets with old school tools and which are the best ones to use.

Many people are overwhelmed by the thousands of options on the market today, from chemicals to machines to spend hours and hours trying to figure out which is the best one for you. But sometimes, what works best is just a few household tools that you already have. In this article, we’ll talk about how some common household items can help you clean your carpets.

There are many ways to clean your carpets, but what kind of tools should you use? In this blog article, we’ll take a look at some different options.

Different Ways to Clean Carpets

If you’re looking for an easier way to clean your carpets than using the harsh chemicals often found in commercial carpet cleaners, try some of these old-school techniques. 

– Fill a bucket with warm water and a mild detergent. Soak the rug for 10 minutes, then blot it dry.

– Pour a pot of boiling water onto the rug, then pour cold water over it to cool. Soak the rug for 10 minutes, then blot it dry.

– Put a layer of plastic wrap on the floor and spread newspapers over it. Place the wet rug over the newspapers and weight down with something heavy. Let the rug soak for 24 hours.

How to clean carpets with old-school tools:

There are a few different ways to clean carpets using old-school tools. One popular method is to use a vacuum cleaner with a hose attachment. Make sure to use the right type of vacuum cleaner for carpets – one that has a crevice tool – and be sure to vacuum the entire surface of the carpet. Be sure to use caution when using a vacuum cleaner on delicate carpets, as it can damage them. 

Another popular method is to use a bucket and spade. Fill the bucket half-way with water and add some vinegar or lemon juice. Soak a rag in the mixture and wring it out thoroughly. Use the rag to wipe down the carpet, being sure to work from top to bottom and side to side. Be sure to rinse the rag well before using it on another surface.

What Should I Use To Clean My Carpets?

If you’re like most people, your carpets probably look a bit tired. But you don’t need to spend a fortune on carpet cleaning services to give them a makeover – you can do it with some old-school tools. Here are five tips for cleaning your carpets with basic supplies:

  1. Get a bucket and some soap. Fill the bucket with water and add enough soap to cover the bottom of the bucket. Soak the rug or carpet in the soapy water for a few minutes.

  1. agitate the rug or carpet with your hands or a broom to loosen any dirt, dust, or debris. Place a clean towel over the area you just cleaned and gently push/pull the towel until all the dirt is removed. Let the rug or carpet dry completely before moving it.

  1. Get a vacuum cleaner with an attachment for hard surfaces like carpets. Plug in the vacuum cleaner and turn it on low (or use the hand-vacuum mode if your vacuum has that feature).Attach the attachments that are designed for hard surfaces and start cleaning. Be sure to move around the room, as not to trap too much debris in one spot.

How To Clean Your Carpets With Old-School Tools

If you’re like most people, your carpets are probably a little dirty and in need of a good cleaning. You might be tempted to reach for the vacuum cleaner, but there are plenty of old-school tools that can get the job done just as well. Here are four ways to clean your carpets with old-school tools:

  1. Use a broom and dustpan. Sweep the dirt and dust off the carpets with a broom and dustpan. Make sure to get into all the nooks and crannies.

  1. Use a dust mop. Wet the mop top and mop the surface of the carpet. Be sure to work inwards from the edges of the rug.

  1. Use a bucket and sponges. Pour water into a bucket and add enough sudsy soap to cover the sponges. Gently wring out the sponges and use them to scrub at the dirt on the carpet. Make sure to get into all the nooks and crannies.

  1. Use a vacuum cleaner with a hose attachment. Put on rubber gloves and attach the hose to the vacuum cleaner.


Did you know that you can clean carpets with old-school tools like a broom and bucket? Not only is this an inexpensive way to get your carpets clean, but it’s also environmentally friendly – no harsh chemicals needed! If you’re looking to save some time and money while getting your carpets cleaned, try this method out – it might just be the perfect solution for you. Thanks for reading.

Liked it? Take a second to support on Patreon!


Please enter your comment!
Please enter your name here